y dose it have to be so tight the bolts its pissin me off

[toxxic boccker]

wana put ma new black/(m90) on but to bolts are av tryed to oil them still isint workin tight

[Bouncer_Kape]

What?

[English-tailor]

wana put ma new black/(m90) on but to bolts are av tryed to oil them still isint workin tight

You need to take the time to make yourself understood, I really dont know what you are trying to say.

[toxxic boccker]

no

[coachgeo]

Here in the US there is a product called "PB Blaster" Penetrant oil.  It's  a spray on like WD-40 but made just for loosening bolts.

It works great on getting bolts to loosen up enough to help you remove them. Im sure there is a simular product on your side of the pond.  Check euro verions of Walmart or your auto part store for it.

[Bouncer_Kape]

If you're trying to loosen a bolt, my advice is a rachet and a pair of pliars...

[ElectricStapler]

You can get everything done with a ratchet with a gator attachment, and a set of regular pliers like kape said.

They are the only tools i need.
The gator attachment is a big attachment with many little cylinders in it. The point is that they conform to any bolt so that you can loosen it.

As for the bolts, try turning them counter-clockwise? haha
if else, just crank away. Check if theres a plastic ring around the bolt, that has to come out. As far as i know they dont have it in most places

[Sprog]

You need to take the time to make yourself understood, I really dont know what you are trying to say.

no

With an attitude like that you're gonna get no help around here at all.

[MCTom]

I'm sorry to say this, and not just asking you to correct spelling/grammar for the hell of it, I REALLY have no idea what you were trying to say there.  And I can understand 1337 speek :S (not sure I should admit that, but there it is )