if the hole is out of round there's really not much you can do about it.

need more detail of what the problem is

yup its gone wonky

can't hurt to ask pro jump, but i'd say go though naz on the projump forum, she'll sort it all out.

snow board boots are too heavy and bulky to attach to bocks, it can work, but you're feet will get very hot and it'll add a lot of weight to the stilts.  You can bolt a shoe to the stilts, but i think that makes them a pain to put on/take off, just get some shoes with a lot of padding on top, and look around for a set of snowboard bindings with a lot of padding and you'll be all set.


as for the knee bar, it should sit right below the bump at the top of your tibia (shin), adding more padding to the kneebar is a common mod, also look for kneepads that go below the kneebar, they will make it more comfortable.

and i almost forgot welcome to the forum

X type is your only possiblity on that list of options,  I weigh 200lbs and i can bottom out s-rex X very easily.  Once you learn how to bock you will over power them pretty quickly.  They'll be good to learn on for a few months.

Before I relay the email I got this morning, do we "like" powerstriders?

They're FL's so not as bad as skyrunner, but might as well get PJ's as they're the same and PJ has a better customer service rep

done

come to bock nyc you will have an opportunity to try s-rex springs on pr frames which i believe are the same you have.

ok, grinding the frame is NBD for me.  I was just worried about them not fitting under the axle (or knee joint) or into the spring mount brackets.  Phew...my dreams aren't shattered.

if you easily bottom your 90120's there no point in getting s-rex's they're way to soft if you can put in that much power, fyi.

I just booked a room, the only people confirmed in it are SignalPAD and myself, Zan is a probably, so we've got room, the room is for 4 but can prolly sleep 5 or 6 as long as people don't mind sleeping on the floor and the more people we cram in the cheaper it is for all of us.

How often is it that the frame bends or parts other then the hoofs need to be replaced?

rarely

Wait...why won't s-rex springs fit into a poweriser frame?  Too thick?

you have to grind out a lip in the top of the frame, the spring is much bulkier than a poweriser spring

cannot be loaded

works now, was ok, surprisingly little running for something supposedly about their transportation uses

ask them not us, if you know they send it through dhl i'm guessing you have a tracking number it should tell you

most parts will fit, they come with a 1 year warranty so if anything breaks in the first year they should hook you up.