mising bolt

[Sprog]

Looking at DKs, there is no bolt down the middle. You are missing the two of the front that hold the corners of the rubber in place.

[Athoul]

To get that nut on you just need to take the spring completly off the hoof, then attach the black metal bit and then put it back together.

Looking at DKs, there is no bolt down the middle. You are missing the two of the front that hold the corners of the rubber in place.

I think he took those off to show us but i'm not sure

[powerking]

i did take them to show u the holes down the center and sprog as u said these hooves u never seen before so there different to what u no about already

athoul i think your rite but i don't feel up to it so i try that way and if i cant i go crying to my daddy he can fix them if i cant as im not that strong to be honest i got the m70s and im just under 10 stone so i need put on some wait lol

[Athoul]

10 stone is perfect for the m70's.
As for taking them apart just go for it, just remember which order you took them apart it's not that hard.

[powerking]

kk will do mite get some new tools as well all mine go missing some strange reason but will get them when i gt get me bolt failing that i can use me dads

[Dark Knight]

The two bolts holds the spring to the black metal which in turns hold them to the metal hoofs axle point. The Rubber is held by four small bolt and contact glue !?
The holes in the hoof are only to make it more light weight !
And my picture was taken some time ago !?

[XarnuSonci]

the whole confusion here is your using the wrong word, your not missing a bolt your missing the nut that goes on the other end of it, take the bolt to a hardware store and they should be able to sort you out with a replacement nut, problem SOLVED

[Big Bad Bounce Boy]

i have had those do you not remember Sprog i was asking about them they are naff really i managed to wear threw them in 3 hours of pure bocking and i made it threw and was scraping bolts that hold it in they are sh** they are 1cm thick and the bolt goes 6mm in. so they are naff but still they need 2 bolts obviously and and depending on where you live there are several shops where it can be done if u live anywhere near southend(i didnt look at you home town) then a place called X-Isle has them and they can replace them if any more help is  needed on these i know all there is thanks alot

BBBB-aka Jack

[Sprog]

i have had those do you not remember Sprog

I do now Jack, thanks for the reminder. 7League hooves FTW.

these hooves u never seen before so there different to what u no about already

I think I just got told to basically feck off. Cheeky Bugger.

The two bolts holds the spring to the black metal which in turns hold them to the metal hoofs axle point. The Rubber is held by four small bolt and contact glue !?
The holes in the hoof are only to make it more light weight !

Thanks for the info DK, I think I get what you mean...

[nikki]

Is it sorted now then?
Cuz if ou want a powerizer nut and bolt i could send you one off our old feet we still have somewhere.
Im not fussed up to you.
Nikki
X

[powerking]

all fixed and thanks guys anf gals for ur help and i toook the BOLT to a shop and they gave me a free bolt as they are so cheap and they neva seen bocks befor so that was a gd deal.


thanks for all ur help people as i did say this is is my first post so im not as gd as most of you yet!!! but i will be soon if im not on my bock all the time.

my next choice is new bocks but i will make a new post for that tomorro or monday.

does any one here no of any1 that lives in stoke who i could boc with!!! if so pm me and we mite meet up !!!

[Sprog]

does any one here no of any1 that lives in stoke who i could boc with!!! if so pm me and we mite meet up !!!

www.PoweriserPages.com/map